Indesit DFG-26B10-EU User Manual Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 72
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
EN
11
Delayed start
It is possible to delay the start time of the wash cycle
by 3, 6 or 9 hours:
1:Afterselecting the desiredwash cycle andany other
options,press the DELAYEDSTART button. the indicator
light will go on.
2:SelectthedesireddelaytimebypressingtheDelayed
Start button repeatedly. The wash phase (3 hours), drying
phase(6hours)andend(9hours)indicatorlightswillgoon
in succession.
If the Delayed Start button is pressed again, the option is
deselected and the indicator light goes off.
3. After the selection process, the countdown will begin if
theStart/Pausebuttonispressed.Theselecteddelay-period
indicatorlight flashes andthe Start/Pause buttonstops
flashing (fixed light).
3.Oncethistimehaselapsed,theDELAYEDSTARTindicator
light goes off and the wash cycle begins.
The Delayed Start function cannot be set once a wash
cycle has started.
Wash options*
The OPTIONS may only be set, changed or reset after
the wash cycle has been selected and before the Start/
Pause button has been pressed.
Only the options which are compatible with the type of wash
cycle set may be selected. If an option is not compatible
with the selected wash cycle
(see Table of wash cycles)
, the
correspondingsymbol/LEDflashesrapidly3times.
If an option is selected which is not compatible with another
previously-selected option, it will flash 3 times and go off,
while the most recently selected option will remain active.
To deselect an option which has been set by mistake, press
the corresponding button again.
Notes:
Optimumperformancelevelswhenusing the “"Rapid” cycle
can be achieved by respecting the specified number of place
settings.
To reduce consumption even further, only run the dishwasher
when it is full.
Note for Test Laboratories: forinformationoncomparativeEN
testing conditions, please send an email to the following address:
Half load
If there are not many dishes to be washed, a half
load cycle may be used in order to save water, electricity
and detergent. Select the wash cycle and press the HALF
LOAD button; the indicator light will go on.
Press the HALF LOAD button again to deselect this option.
Remember to halve the amount of detergent.
Special wash cycles
and Options
* Only available in selected models.
Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 71 72

Comments to this Manuals

No comments