Indesit 3D AA NX Instruction for Use download pdf (Page 22)

Installation

! Before placing your new appliance into operation please read

these operating instructions carefully. They contain important

information for safe use, for installation and for care of the

appliance.

! Please keep these operating instructions for future reference.

Pass them on to possible new owners of the appliance.

Positioning and connection

Positioning

1. Place the appliance in a well-ventilated humidity-free room.

2. Do not obstruct the rear fan grills. The compressor and

condenser give off heat and require good ventilation to

operate correctly and save energy.

3. Leave a space of at least 10 cm between the top part of the

appliance and any furniture above it, and at least 5 cm

between the sides and any furniture/side walls.

4. Ensure the appliance is away from any sources of heat (direct

sunlight, electric stove, etc.).

5. In order to maintain the correct distance between the

appliance and the wall behind it, fit the spacers supplied in

the installation kit, following the instructions provided.

Levelling

1. Install the appliance on a level and rigid floor.

2. If the floor is not perfectly horizontal, adjust the refrigerator by

tightening or loosening the front feet.

Electrical connections

After the appliance has been transported, carefully place it

vertically and wait at least 3 hours before connecting it to the

electricity mains. Before inserting the plug into the electrical

socket ensure the following:

• The appliance is earthed and the plug is compliant with the law.

• The socket can withstand the maximum power of the

appliance, which is indicated on the data plate located on the

bottom left side of the fridge (e.g. 150 W).

• The voltage must be in the range between the values

indicated on the data plate located on the bottom left side

(e.g. 220-240V).

• The socket is compatible with the plug of the appliance. If the

socket is incompatible with the plug, ask an authorised

technician to replace it (

see Assistance

). Do not use

extension cords or multiple sockets.

! Once the appliance has been installed, the power supply cable

and the electrical socket must be easily accessible.

! The cable must not be bent or compressed.

! The cable must be checked regularly and replaced by

authorised technicians only (see Assistance).

The manufacturer declines any liability should these safety The manufacturer declines any liability should these safety

The manufacturer declines any liability should these safety

measures not be observed.measures not be observed.

measures not be observed.

Accessories

SHELVES•: with or without grill.

Due to the special guides the shelves are removable and the

height is adjustable (

see diagram

), allowing easy storage of

large containers and food. Height can be adjusted without

complete removal of the shelf.

FLEX COOL BOX*

This is the new box to keep meat, fish and cheese fresh.

When

positioned in the “lower” part of the fridge compartment, it is

ideal for meat and fish; when moved to the “top” part of the

fridge, it is perfect for cheese.

It can be taken out of the fridge

when it is not needed.

CAN RACK

• shelf: stores cans horizontally (

see diagram

Yoghurt, butter or general containers may also be stored here.

ODOUR FILTER*: Some models are fitted with a new odour filter

with active carbons, which ensures better air quality inside the

refrigerator.

The filter is located on the bottom right-hand side, inside the

ventilation opening.

• Varies by number and/or position.

* Available only on certain models.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 59 60

Comments to this Manuals

No comments

Indesit 3D AA NX Instruction for Use Page 22

Comments to this Manuals

Related products and manuals for Fridges Indesit 3D AA NX