Indesit VIA 630 C Instruction for Use download pdf (Page 10)

4. Set the cooking duration using the - and +

buttons.

5. Confirm by pressing the

button or automatic

selection occurs after 10 seconds.

The timer begins counting down immediately. A buzzer

sounds for approximately 1 minute and the cooking

zone switches off when the set programme has

finished. Repeat the above procedure for each hotplate

you wish to programme.

Using multiple programmes and the display

If one or more hotplates are programmed, the display

will show the data for the hotplate with the least time

remaining, and the light corresponding to the position

of the hotplate will flash. The lights corresponding to

the other hotplates programmed will be switched on.

To visualise the time remaining for the other

programmed hotplates, press the

button

repeatedly: the time remaining for each hotplate will be

shown sequentially in a clockwise order,

starting from the front left hotplate.

Changing the programme

1. Press the

button repeatedly until the duration

you wish to change is shown.

2. Use the

buttons to set the new duration.

3. Confirm by pressing the

button.

To cancel a programme, follow the above instructions.

At step 2, press the

- button: the duration decreases

progressively until it reaches 0 and switches off. The

programme resets and the display exits programming

mode.

Timer

The hob must be switched on.

The timer can be used to set a duration up to 99

minutes.

1. Press the

programming button until the timer

indicator light is illuminated

2. Set the desired duration using the

- and +

buttons.

3. Confirm by pressing the

button.

The timer begins counting down immediately. When

the time has elapsed, a buzzer will sound (for one

minute).

Control panel lock

When the hob is switched on, it is possible to lock the

oven controls in order to avoid accidental changes

being made to the settings (by children, during

cleaning, etc.). Press the

button to lock the control

panel: the indicator light above the button will switch

on.

To use any of the controls (e.g. to stop cooking), you

must switch off this function. Press the

button for a

few moments, the indicator light will switch off and the

lock function will be removed.

Switching off the hob

Press the button to switch off the appliance - do

not rely solely on the pan sensor.

If the control panel lock has been activated, the

controls will continue to be locked even after the hob is

switched on again. In order to switch the hob on again,

you must first remove the lock function.

“Demo” mode

It is possible to set the hob to a demonstration mode

where all the controls work normally but the heating

elements do not switch on. To activate the “demo”

mode the hob must be switched on, with all the

hotplates switched off.

• Press and hold the

+ and - buttons

simultaneously for 6 seconds. When the 6 seconds

have elapsed, the ON/OFF and CONTROLS

LOCKED indicator lights will flash for one second.

Release the

+ and - buttons and press the

button;

• The display will show the text DE and MO and the

hob will be switched off.

• When the hob is switched on again it will be set to

the “demo” mode.

To exit this mode, follow the procedure described

above. The display will show the text DE and OF and

the hob will be switched off. When it is next switched

on, the hob will function normally.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 79 80

Comments to this Manuals

No comments

Indesit VIA 630 C Instruction for Use Page 10

Comments to this Manuals

Related products and manuals for Hobs Indesit VIA 630 C