Indesit KDP60CS User Manual Page 14

  • Download
  • Add to my manuals
  • Print
  • Page
    / 28
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 13
14
GB
Setting the Grill
Door in
grilling
position
CAUTION - ACCESSIBLE PARTS MAY BECOME
HOT WHEN THE GRILL IS IN USE. CHILDREN
SHOULD BE KEPT AWAY.
GRILLING SHOULD NEVER BE UNDERTAKEN
WITH THE DOOR CLOSED.
Model KT6C3:
The grill control is fully variable, from the minimum
setting (1), through to the maximum setting (6).
The control is Off at O.
Models KD6C35 and KDP60:
The grill control is designed to provide variable heat
control of either the twin grill elements on together or
the single left hand grill element only, depending upon
which direction the control knob is rotated.
- With the control rotated clockwise 1 through to 4 the
twin elements will come on together.
- With the control turned anti-clockwise 1 through to 4
and the single left hand element will come on only.
The control is Off at O.
Note (Models KD6C35 and KDP60 only):The grill
will not operate unless the top oven control is in
the OFF position.
Grill
Food which requires browning only should be placed
under the hot grill, directly on the shelf on the first or
second position from the bottom of the oven,
according to the depth of the dish (KD6C35 and
KDP60 only).
Open the Grill door to the grilling position. i.e. fully.
With the grill door in the grilling position, heating the
grill is achieved by turning the control clockwise to the
desired 'grill setting' on the control panel.
Never: line the grill pan with aluminium foil.
Note: Preheat the grill at maximum setting for
approximately 5 minutes.
The grill pan is placed on the shelf or grill pan
support/runner and should be correctly positioned
under the grill element. Leave the control at maximum
for toast, sealing and fast cooking of foods.
For thicker foods requiring longer cooking, turn the
switch to a lower setting after the initial sealing on
both sides at maximum. The thicker the food the
lower the control should be set.
Page view 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

Comments to this Manuals

No comments