You can download the Safety Instructions, User Manual, Product Fiche and Energy data by:
• Visiting our website - docs.whirlpool.eu
• Using QR Code
• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When
contacting our After-sales Service, please state the codes provided on your product’s identi cation plate.
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.
In order to receive a more complete assistance,
please register your product on
www.whirlpool.eu/register
Before using the appliance carefully read the Safety Instructions.
Before using the appliance carefully read the Safety Instructions.
OPENING OF THE DOOR DURING THE CYCLE
During operation, it is possible to open the door. After having
closed it, press the button Start/Pause again to restart the
dryer.
PROGRAMS
Eco Cotton kg Max*
Standard cotton programme, suitable to dry normally wet
cotton laundry. Most ecient programme in terms of energy
consumption for drying cotton laundry. The values on the
Energy Label are based on this programme.
Mixte kg 4
This programme is ideal for drying cotton and synthetic
fabrics together.
Bed Linen Kg Max*
This programme is intended for drying cotton sheets.
Shirts kg 3
This is a programme for Shirts made from cotton or cotton
blend/synthetics.
Sport kg 4
For drying sports garments made of synthetics or cotton.
Duvet
Programme intended to dry bulky garments, as single
duvet.
Jeans kg 3
For drying cotton jeans-wear and garments made of robust
cotton, like denim, such as trousers and jackets.
FIRST TIME USE
Make sure that the water tank is correctly inserted. Make
sure that the drain hose on the back of the dryer is xed
correctly, either to the dryer’s water tank, or to your
domestic sewage system.
The dryer should be installed in environment in a room
temperature range of 20°to 23°C for optimum
performance. But will function if the room is between 14
and 30°C. Before you use your dryer ensure that it has
been in a upright position for at least 6 hours.
DAILY USE
Doing this will keep your machine working at its BEST!
Remember to empty your water tank after each drying
cycle.Remember to clean your lters after each drying
cycle. (Refer to section Care & Maintanence).
1. Open the door and load garments. Always refer to
instructions on clothing labels and the max loads indicated
in the programme section. Empty pockets. Make sure
garments do not get caught between the door and/or the
door lter.
2. Close the door.
3. Press the button On/O.
4. Select the programme according to the laundry type.
5. Select the options, if necessary.
6. To start the cycle, press the Start/Pause button.
7. At the end of the drying cycle, a buzzer will beep. An
indicator on the control panel signals the end of the cycle.
Pull the load out immediately to prevent the formation of
creases on laundry
8. Turn the machine o by pressing the button On/O,
open the door and pull clothing out. If the machine is not
switched o manually, after about a quarter of an hour from
the cycle end, the appliance turns o automatically to save
energy.
If this last stage is not carried out immediately, some machines
and/or some programmes/options are equipped with Crease
Care system. For some hours, after the end of drying, the
drum rotates at regular intervals to prevent the formation of
creases. In case of power failure, it is necessary to press the
button Start/Pause to restart the cycle.
*MAX LOAD 9 Kg (Dry load)
CARE LABEL
Always check the care labels, especially when placing garments in
the tumble dryer for the rst time. Below are the most commonly
used symbols:
May be tumble dried.
Do not tumble dry.
Tumble dry – high heat.
Tumble dry – low heat.
CONTROL PANEL
1 ON/OFF button (Reset if long pressed)
2 Programme selection Knob
3 Start/Pause
Options Buttons*
4 Cycle End
5 High Heat
6 Anti Tangle (Mute if long pressed)
7 Dryness Level
8 Start Delay
9 Timed Drying
10 Rapid (Key Lock if long pressed)
11 Gentle
12 Fresh Care+
*Note: some models may have the wording in full instead of the icons
INDICATORS
Dryness Level: Iron Dry - Hanger Dry - Cupboard Dry - Extra Dry
Cycle phase: Drying - Cool Down - End of cycle
Empty Water tank - Clean Door lter: primary, secondary - Autoclean
Refer to Troubleshooting section: Failure: Call after sales service
Demo Mode
1
3
2
12
10
11
78 9
3“
3“
h
6
5
4
(12 pages)
(8 pages)
(64 pages)
(84 pages)
(32 pages)
(68 pages)
(84 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals