Indesit LI6 S1 W Use and Care Guide download pdf (Page 6)

6

This appliance has been designed,

constructed and distributed in

compliance with the requirements of

European Directives:

LVD 2014/35/EU, EMC 2014/30/EU and

Ro HS 2011/65/EU.

This appliance has been designed,

constructed and distributed in

compliance with the Ecodesign and

energy Labeling Requirements of

ECDirectives: 2009/125/EC and

2010/30/EU.

DISPOSAL OF PACKAGING

MATERIALS

The packaging material is 100%

recyclable and is marked with the

recycle symbol

. The various parts

of the packaging must therefore be

disposed of responsibility and in full

compliance with local authority

regulations governing waste disposal.

SCRAPPING OF HOUSEHOLD

APPLIANCES

When scrapping the appliance, make

it unusable by cutting o the power

cable and removing the doors and

shelves (if present) so that children

cannot easily climb inside and

become trapped.

This appliance is manufactured with

recyclable

or reusable materials.

Dispose of it in accordance with local

waste disposal regulations.

For further information on the

treatment, recovery and recycling of

household electrical appliances,

contact your competent local

authority, the collection service for

household waste or the store where

you purchase the appliance.

This appliance is marked in

compliance with European Directive

2012/19/EU, Waste Electrical and

Electronic Equipment (WEEE).

By ensuring this product is disposed

of correctly, you will help prevent

potential negative consequences for

the environment and human health,

which could otherwise be caused by

inappropriate waste handling of this

product.

The symbol

on the product or on

the accompanying documentation

indicates that it should not be treated

as domestic waste but must be taken

to an appropriate collection center for

the recycling of electrical and

electronic equipment.

ENERGY SAVING TIPS

Install the appliance in a dry, well

ventilated room far away from any

heat source (eg. radiator, cooker, etc.)

and in place not exposed directly to

the sun. If required, use an insulating

plate.

To guarantee adequate ventilation

follow installation instructions.

Insucient ventilation on back of the

product increases energy

consumption and decreases cooling

eciency.

Frequent door opening might cause

an increase in Energy consumption.

The internal temperatures of the

appliance and the Energy

Consumption may be aected by the

ambient temperature, frequency of

door opening, as well as location of

the appliance. Temperature setting

should take into consideration these

factors.

Reduce to a minimum door opening.

When thawing frozen food, place

them in the refrigerator. The low

temperature of the frozen products

cools the food in the refrigerator.

Allow warm food and drinks to cool

down before placing in the appliance.

Positioning of the shelves in the

refrigerator has no impact on the

ecient usage of energy. Food should

be placed on the shelves in such way

to ensure proper air circulation (food

should not touch each other and

distance between food and rear wall

should be kept).

You can increase storage capacity of

frozen food by removing baskets and,

if present, Stop Frost shelve,

maintaining an equivalent energy

consumption.

High energy class products are tted

with high eciency motors that

remain operational for longer, but

have a low power consumption. Do

not worry if the engine continues to

run for longer periods.

DECLARATION OF CONFORMITY

SAFEGUARDING THE ENVIRONMENT

1 2 3 4 5 6 7 8 9 10 11 ... 22 23

Comments to this Manuals

No comments