Indesit WITP 821 (EU) Instruction for Use Page 7

  • Download
  • Add to my manuals
  • Print
  • Page
    / 60
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 6
7
GB
Personalisations
C
Setting the temperature
Turn the TEMPERATURE knob to set the wash temperature (see Programme table on page 6).
The temperature can be lowered, or even set to a cold wash ( ).
Note. To avoid excessive vibrations, before every spin cycle the machine distributes the load in a uniform manner by conti-
nuously rotating the drum at a speed which is slightly faster than the normal washing speed.
When, despite repeated attempts, the load is still not evenly distributed, the machine spins at a lower speed than the set
frequency.
If the load is excessively unbalanced, the machine attempts to distribute it instead of spinning.
The balancing attempts may extend the total duration of the cycle, up to a maximum of 10 minutes.
Functions
To enable a function:
1. press the button corresponding to the desired function, according to the table below;
2. the function is enabled when the corresponding button is illuminated.
Note: The rapid flashing of the button indicates that the corresponding function cannot be selected for the programme set.
Option Effect Comments Enabled with
programmes:
Bleaching
Bleaching cycle de-
signed to remove the
toughest stains.
Please remember to pour the bleach into extra compartment 4
(see page 8).
2,
, , 5,
6, 7, 8, Rinse
cycles.
Extra Rinse
Increases the efficien-
cy of the rinse.
Recommended when the appliance has a full load or with large
quantities of detergent.
1, 2, , ,
5, 6, 7, 8, 10,
11 and Rinse
cycles.
800
400
Reduces the spin
speed.
All program-
mes except
for 11 and
draining.
Anti-crease
Reduces fabric crea-
sing, making ironing
easier.
Setting this function will interrupt programmes 11 with a laundry
soak (Anti-crease) and the Rinse phase indicator light will blink.
To complete the cycle, press the Anti-crease button.
1, 2,
, , 5,
6, 7, 8, 11.
Page view 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 59 60

Comments to this Manuals

No comments