Indesit WM 12 X (UK) Instruction for Use download pdf (Page 4)

D

A

B

C

E

F

G

H

I

Press this button in

programmes 5-6-7-9-10 and the

wash cycle will come to a stop

on symbol

. You can comple-

te it by pressing button D again.

Important: this function should

not be used when button F (Stain

removal) has been pressed.

Slow spin

Use this button to reduce the

spinning speed from 1200 to

600 rpm for the cotton and linen

programmes and from 850 to

600 rpm for the synthetic

fabrics programmes.

Stain removal (see page 7)

Thanks to this command, the

washing machine will carry out

a more intensive wash that

optimises the effectiveness of the

liquid additives, thus allowing

more resistant stains to be

removed. When you press the

stain removal button, you cannot

activate the pre-wash.

On-off

When button G is pressed, the

washing machine is switched

on, when it is not the machine

is switched off.

Turning the appliance off

does not cancel the selected

programme.

The on-off lamp

Lamp H flashes when the

appliance is switched on and

awaiting a programme to be set.

A steady light means the

appliance has accepted the

selected programme.

Here I’m in command

Understanding the control panel

Making the right choice is important. And it’s easy.

Programme selector knob

Use this knob to select the wash

programme.

Turn this knob clockwise only.

To select a programme, you

should turn the knob so that the

symbol/number of the desired

programme is in line with the

pointer on the knob.

Now press on/off button G

(position I), pilot lamp H will start

flashing.

After 5", the setting will be

accepted, pilot lamp H will stop

flashing (staying lit) and the wash

cycle will begin.

Should you wish to interrupt the

programme in progress or set a

new one, select one of the

symbols

(Stop/Reset) and wait

5" : when the cancellation has

been accepted, pilot lamp H

flashes, and you can then turn the

appliance off.

After the wash cycle has been set

and accepted by the washing

machine, turning the knob will

have no effect (except for when

it is on position

Stop/Reset).

Temperature control knob

It is used to set the wash tempe-

rature in the recommended

programme table on pag. 4. It also

allows you to reduce the tempe-

rature recommended for the

selected programme, and even to

set a cold wash cycle (

).

Detergent dispenser

It is divided into three

compartments:

1.Detergent for pre-wash;

2.Detergent for the main cycle

wash;

3. Fabric conditioner.

The washing machine is

equipped with an extra

compartment 4 (provided as an

accessory) for the bleach, to be

inserted in compartment 1.

Easy iron

This function allows your

washing to come out of the

machine without creases,

making it much easier to iron.

You can use it with programmes

3-4 (Cotton), 5-6-7 (Synthetics)

and 9-10 (Delicates).

The detergent dispenser with the

additional bleach compartment

is here.

3

Instructions for installation and use

The door block lamp

The safety lamp indicates that the

washing machine door is locked

to prevent it from being opened

accidentally. To avoid any

damages to lock mechanism,

you must wait for the lamp to

extinguish, before attempting to

open the door which takes around

three minutes.

M

A

X

1

2

4

3

1 2 3 4 5 6 7 8 9 ... 19 20

Comments to this Manuals

No comments