Indesit EDIFP 68B1 A EU User's Guide Page 3

  • Download
  • Add to my manuals
  • Print
  • Page
    / 8
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 2
EN
3
PROGRAMS TABLE
PROGRAMS DESCRIPTION
Instructions on wash cycle selection.
ECO
Normally soiled crockery. Standard program, the most ecient in
terms of its combined energy and water consumption.
AUTO INTENSIVE
Automatic program for heavily soiled dishes and pans (not to be used
for delicate items).
AUTO NORMAL
Automatic program for normally soiled pans and dishes.
DELICATES
Program for delicate items, which are more sensitive to high tempera-
tures, for example glasses and cups.
RAPID 40’
Program to be used for lightly-soiled dishes with no dried food
residues.
SOAK
Use to refresh crockery planned to be washed later. No detergent to be
used with this program.
HALF LOAD
Ideal for washing a half load of lightly or normally soiled crockery.
EXTRA
Program that allows to wash very big items loaded in the lower rack.
Notes:
Please note that cycles like Fast or Rapid are most eective for lightly
soiled dishes.
To reduce consumption even further, only run the dishwasher
when it is full.
Program
Drying
Available
options
*)
Detergent
container
Duration
of wash
program
(h:min)
**)
Water
consumption
(litres/cycle)
Energy
consumption
(kWh/cycle)
Tub
B
1. Eco 50°
3:10 11 1,03
2. Auto Intensive 65°
-
2:00 - 3:10 14 - 15,5 1,5 - 1,80
3. Auto Normal 55° - 1:30 - 2:30 14,5 - 16 1,2 - 1,35
4. Delicates 45°
-
1:40 11,0 1,10
5. Rapid 40’ 50°
-
- 0:40 9,5 0,90
6. Soak
- - -
- 0:12 4,5 0,01
7. Half Load 50° - 1:20 12,0 1,15
8. Extra 65°
- -
1:00 11,0 1,20
ECO program data is measured under laboratory conditions according to European Standard EN 50242. Note for Test Laboratories: For information on
comparative EN testing conditions, please send an email to the following address: assistenza_en_lvs@indesitcompany.com
Pre-treatment of the dishes is not needed before any of the programs.
*) Not all options can be used simultaneously.
**) The duration of the program shown on the display or in the booklet is an estimate calculated on standard conditions. The actual time may vary
depending on many factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load,
load balancing, additional selected options and sensor calibration. The sensor calibration can increase program duration up to 20 min.
Standby consumption: Left-on mode consumption: 5 W - O mode consumption: 0.5 W
Page view 2
1 2 3 4 5 6 7 8

Comments to this Manuals

No comments