Indesit TZAA 1 User Manual Page 47

  • Download
  • Add to my manuals
  • Print
  • Page
    / 52
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 46
GB
47
Respecting and conserving the environment
Install the appliance in a fresh and well-ventilated room. Ensure
that it is protected from direct sunlight and do not place it near
heat sources.
Try to avoid keeping the door open for long periods or opening
the door too frequently in order to conserve energy.
Do not fill the appliance with too much food: cold air must
circulate freely for food to be preserved properly. If circulation is
impeded, the compressor will work continuously.
Do not place hot food directly into the refrigerator. The internal
temperature will increase and force the compressor to work
harder and will consume more energy.
Defrost the appliance if ice forms (
see Maintenance
). A thick
layer of ice makes cold transference to food products more
difficult and results in increased energy consumption.
Regularly check the door seals and wipe clean to ensure they
are free of debris and to prevent cold air from escaping (
see
Maintenance
).
Troubleshooting
If the appliance does not work, before calling for Assistance (see
Assistance), check for a solution from the following list.
The green POWER indicator light does not illuminate.
The plug has not been inserted into the electrical socket, or not
far enough to make contact, or there is no power in the house.
The WARNING Indicator light is Always On.
The door is not closed properly or has been open continuously.
The door has been opened too frequently.
The TEMPERATURE ADJUSTMENT knob is not in the correct
position.
The motor runs continuously.
The TEMPERATURE ADJUSTMENT knob is in the “Fast Freeze”
position: the yellow FAST FREEZE indicator light is on (
see
Description
).
The door is not closed properly or is continuously opened.
The outside ambient temperature is very high.
The thickness of the frost exceeds 2-3 mm (
see Maintenance
).
The appliance makes a lot of noise.
The appliance has not been installed on a level surface (
see
Installation
)
.
The appliance has been installed between cabinets that vibrate
and make noise.
The internal refrigerant makes a slight noise even when the
compressor is off. This is not a defect, it is normal.
Page view 46
1 2 ... 42 43 44 45 46 47 48 49 50 51 52

Comments to this Manuals

No comments