Indesit BAN 336 NF (SP) Instruction for Use download pdf (Page 19)

Using the freezer to its full potential

 Use the FREEZER OPERATION knob to adjust the

temperature (see Description).

 Do not re-freeze food that is defrosting or that has already

been defrosted. These foods must be cooked and eaten

(within 24 hours).

 Fresh food that needs to be frozen must not come into

contact with food that has already been defrosted. Fresh

food must be stored in the top FREEZER and STORAGE

compartment where the temperature drops below -18°C

and guarantees rapid freezing.

WARNING: to avoid blocking the air circulation inside

the freezer compartment, it is advisable not to obstruct

the ventilation holes with food or containers.

 Do not place glass bottles which contain liquids, and which

are corked or hermetically sealed in the freezer because

they could break.

 The maximum quantity of food that may be frozen daily is

indicated on the plate containing the technical properties

located on the bottom left side of the refrigerator

compartment (for example: Kg/24h: 4).

 To freeze (if the freezer is already operating):

press the rapid freezing SUPER FREEZE button

(corresponding yellow indicator light illuminates), insert the

food and close the door. The function is disabled

automatically after 24 hours or when optimal temperatures

have been reached (indicator light goes out);

! Do not open the door during freezing.

! If there is a power cut or malfunction, do not open the

freezer door. This will help maintain the temperature inside

the freezer, ensuring that foods are conserved for at least 9 -

14 hours.

WATER LEVEL

MAX

WATER LEVEL

MAX

WATER LEVEL

MAX

Ice

ice tray

The fact that they are situated on the top part of the freezer

drawers ensures greater cleanliness: the ice no longer

comes into contact with the food placed inside the freezer

compartment; furthermore, the dripping of the water during

filling is avoided (a lid to cover up the hole after filling with

water is also provided).

1. Pull out the tray by pushing it up.

Check that the tray is ompletely empty and fill it with

water through the opening provided.

2. Take care not to exceed the level indicated (MAX

WATER LEVEL). Excess water prevents the ice cubes

from dispensing (if this happens, wait for the ice to melt

and empty the tray).

3. Turn the tray 90°: due to the connected compartments

each mould fills with water (see diagram).

4. Close the opening with the lid provided and put the tray

back.

5. When the ice has formed (minimum time approximately

8 hours) knock the tray against a hard surface and wet

the outside so that the ice cubes come loose and take

them out through the opening.

1 ... 18 19 20 ... 60

Comments to this Manuals

No comments

Indesit BAN 336 NF (SP) Instruction for Use Page 19

Comments to this Manuals

Related products and manuals for Fridge-freezers Indesit BAN 336 NF (SP)