Indesit SI C35 CKG Instruction for Use download pdf (Page 25)

hotpoint.eu

• The plug may not be inserted into the electrical socket, or it may not

make contact.

• Check that the temperature is not set to MIN.

• The temperature indicator light turns on to indicate that the iron is

getting hot. The indicator light turns off when the set temperature is

reached.

• The steam regulator is set to Off.

• Not enough water in the water reservoir. Fill the water reservoir.

• Theironisnotsufcientlyhotand/ortheanti-dripfunctionisactive.

Replace the iron in vertical position, using the stand, and wait until

the temperature indicator light tuns off before starting to iron.

• The plate temperature may be too low due to the excessively frequent

activation of the shot of steam button. Slightly increase the interval

between steam shots.

• The device is in upright position. Press the steam shot button to

check whether any steam emerges

• The iron was leave unattended. The automatic switch-off function is

active. Move the iron o switch it back on.

• There may be residues in the vaporisation chamber. Make the

cleaning operations (see chapter “Cleaning and maintenance”,

section“Auto-CleanFunction”accordingtothemodel).

• You are using perfume, vinegar, starch, vinegar, starch, scale-

removing agents, ironing products or other chemical substances.

Remember that these substances may damage the product. Rinse

the water reservoir.

• .You are using starch. You can use starch directly on the inside out of

the fabrics and in any case never in the water reservoir.

• The garment was not washed correctly or has some soap residues.

• Youareironinganewgarmentthatwasnotwashedforthersttime.

• The soleplate temperature may be too low due to the excessively

frequent activation of the shot of steam button. Slightly increase the

interval between steam shots.

• The soleplate temperature is set to a too-low temperature.

• You have replaced the iron horizontally without emptying it and/or

without setting the steam regulator to Off.

• Youdidnotclosethelidofthellerholecorrectly.

• You have used the shot of steam function with a too-low temperature.

We recommend to use these functions with temperatures higher than

The soleplate remains cold

and does not warm up.

The temperature indicator

light turns on and off.

Steam comes out in reduced

quantity or does not come

out.

Impurities come out from

the soleplate and stain the

garments.

Water is dripping out of the

soleplate

TROUBLESHOOTING

Problem Possible cause / Solutions

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 75 76

Comments to this Manuals

No comments

Indesit SI C35 CKG Instruction for Use Page 25

Comments to this Manuals

Related products and manuals for Irons Indesit SI C35 CKG