Indesit FZ 99 P.1 IX F /HA Instruction for Use download pdf (Page 17)

! The first time you use your appliance, heat the

empty oven with its door closed at its maximum

temperature for at least half an hour. Ensure that the

room is well ventilated before switching the oven off

and opening the oven door. The appliance may emit

a slightly unpleasant odour caused by protective

substances used during the manufacturing process

burning away.

Setting the clock

 The clock may be set when the oven is switched

off or when it is switched on, provided that a the end

time of a cooking cycle has not been programmed

previously.

1. Press the

button several times until the

icon and the first two digits on the display start to flash.

2. Turn the TIMER KNOB towards + and - to

adjust the hour value.

3. Press the

button again until the other two

digits on the DISPLAY begin to flash.

4. Turn the TIMER KNOB towards + and - to

adjust the minute value.

5. Press the

button again to confirm.

Setting the timer

 This function does not interrupt cooking and does

not affect the oven; it is simply used to activate the

buzzer when the set amount of time has elapsed.

1. Press the

button several times until the

icon and the three digits on the display begin to

flash.

2. Turn the TIMER KNOB towards + and - to

adjust the minute value.

3. Press the

button again to confirm.

The display will then show the time as it counts

down. When this period of time has elapsed the

buzzer will be activated.

Starting the oven

1. Select the desired cooking mode by turning the

SELECTOR knob.

2. The oven begins its preheating stage and the

preheating indicator lights up.

The temperature may be changed by turning the

THERMOSTAT knob

3. When the preheating indicator

switches off

and a buzzer sounds the preheating process is

complete: you may now place the food in the oven.

4. During cooking it is always possible to:

- change the cooking mode by turning the

SELECTOR knob

- change the temperature by turning the

THERMOSTAT knob

- set the cooking duration in addition to the cooking

end time

(see Cooking modes)

- stop cooking by turning the SELECTOR knob to the

0 position.

5. The oven switches off automatically after two

hours: this default period of time is set for all

cooking modes for safety reasons.

The cooking duration may be changed

(see Cooking modes).

6. If a blackout occurs while the oven is already in

operation, an automatic system within the appliance

will reactivate the cooking mode from where it was

interrupted as long as the temperature has not

dropped below a certain level. Programmed cooking

modes which have not started will not be restored

and must be reprogrammed.

! There is no preheating stage for the FAST

COOKING and BARBECUE modes.

! Never put objects directly on the bottom of the

oven; this will avoid the enamel coating being

damaged.

! Always place cookware on the rack(s) provided.

Cooling ventilation

In order to cool down the external temperature of the

oven, a cooling fan blows a stream of air between

the control panel and the oven door. In the FAST

COOKING mode, the fan is activated automatically

after ten minutes. In the BAKING mode, the cooling

fan is only activated when the oven is hot. At the

beginning of the FAST CLEAN mode, the cooling fan

operates at low speed.

! Once cooking has been completed, the cooling fan

continues to operate until the oven has cooled down

sufficiently.

Oven light

When the oven is not in operation, the lamp can be

switched on at any time by opening the oven door.

Start-up and use

1 ... 16 17 18 ... 60

Comments to this Manuals

No comments

Indesit FZ 99 P.1 IX F /HA Instruction for Use Page 17

Comments to this Manuals

Related products and manuals for Ovens Indesit FZ 99 P.1 IX F /HA