6
GB
If one or both of the liquids are dissolved, this is an indication of increased
temperature in the freezer.
Even the partial melting of one of the two liquids can show an abnormal
increase of the internal temperature.
If the liquid A1 melts, food must be eaten in a week.
If the liquid A2 melts, food should be thrown away.
• Do not leave the door open for a long period of time. Close the door
of the freezer since the blackout sensor detector can give the wrong
alarm. Load or unload the freezer as quickly as possible to avoid
interventions of the black-out detector sensor. Leaving the door
open for a long period of time, the liquid can dissolve on the black-
out detector sensor, but the food in the freezer can be still in good
condition.
• Check the state of the liquid only in the presence of electricity. The
freezer is able to maintain the frozen food properly for xx hours
(depending on the outside temperature) in the case of black-out. If
the refrigerator is in a condition of black-out for a shorter period, it is
recommended not to open the doors and wait.
• Place the hot food on the back of the freezer compartment. The hot
food that is close to the detector blackout sensor may dissolve liquids
and cause ill-timed interventions.
Maintenance and care
Switching the appliance o
During cleaning and maintenance it is necessary to disconnect the
appliance from the electricity supply.
It is not sufficient to set the temperature adjustment knobs on
(appliance o ) to eliminate all electrical contact.
Cleaning the appliance
• The external and internal parts, as well as the rubber seals may be
cleaned using a sponge that has been soaked in lukewarm water and
bicarbonate of soda or neutral soap. Do not use solvents, abrasive
products, bleach or ammonia.
• The removable accessories may be soaked in warm water and soap
or dishwashing liquid. Rinse and dry them carefully.
• The back of the appliance may collect dust which can be removed by
delicately using the hose of a vacuum cleaner set on medium power.
The appliance must be switched o and the plug must be pulled out
before cleaning the appliance.
Avoiding mould and unpleasant odours
• The appliance is manufactured with hygienic materials which are odour
free. In order to maintain an odour free refrigerator and to prevent the
formation of stains, food must always be covered or sealed properly.
• If you want to switch the appliance o for an extended period of time,
clean the inside and leave the doors open.
Replace LED * light
The LED lighting, thanks to the powerful diused light, allowes a clear view
of each food. If you need to replace the LED light, contact theTechnical
Service.
Replacing the light bulb *
To replace the light bulb in the refrigerator compartment, pull out the
plug from the electrical socket. Follow the instructions below.
Access the light bulb by removing the cover as indicated in the diagram.
Replace it with a similar light bulb within the power range indicated on
the cover.
Precautions and tips
! The appliance was designed and manufactured in compliance with
international safety standards. The following warnings are provided for
safety reasons and must be read carefully.
This appliance complies with the following Community Directives:
- 73/23/EEC of 19/02/73 (Low Voltage) and subsequent amendments;
-89/336/EEC of 03.05.89 (Electromagnetic Compatibility) and subsequent
amendments;
- 2002/96/CE.
3
* Varies by number and/or position, available only on certain models.
(52 pages)
(12 pages)
(52 pages)
(8 pages)
(4 pages)
(72 pages)
(36 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals