Indesit WA105 User Manual download pdf (Page 4)

Easy iron

This function allows your

washing to come out of the

machine without creases,

making it much easier to iron.

You can use it with programmes

3-4 (Cotton), 5-6-7 (Synthetics)

and 9-10 (Delicates).

Press this button in

programmes 5-6-7-9-10 and the

wash cycle will come to a stop

on symbol

. You can comple-

te it by pressing button E again.

Important:

this function should

not be used when button H

(stain removal) has been

pressed.

Extra rinsing

This helps to increase the amount

of rinse cycles in programmes for

cotton and synthetics fabrics. We

recommend that you use it to

improve the machine's rinsing

power when dealing with a full load

and a great amount of detergent.

Rapid wash

This button reduces the length

of the wash programme by

about 30%. It cannot be used

with special programmes (see

page 4) or those for wool and

silk.

Stain removal (see page 19)

Thanks to this command, the

washing machine will carry out

a more intensive wash that

optimises the effectiveness of the

liquid additives, thus allowing

more resistant stains to be

removed. When you press the

stain removal button, you cannot

activate the pre-wash.

Here I’m in command

Understanding the control panel

Making the right choice is important. And it’s easy.

Programme selector knob

Use this knob to select the wash

programme.

Turn this knob clockwise only.

To select a programme, you

should turn the knob so that the

symbol/number of the desired

programme is in line with the

pointer on the knob.

Now press on/off button I

(position I), pilot lamp L will start

flashing.

After 5", the setting will be

accepted, pilot lamp L will stop

flashing (staying lit) and the

wash cycle will begin.

Should you wish to interrupt the

programme in progress or set a

new one, select one of the

symbols

(Stop/Reset) and

wait 5" : when the cancellation

has been accepted, pilot lamp

L flashes, and you can then turn

the appliance off.

After the wash cycle has been

set and accepted by the

washing machine, turning the

knob will have no effect (except

for when it is on position

Stop/

Reset).

Temperature control knob

It is used to set the wash tempe-

rature in the recommended

programme table on pag. 4. It also

allows you to reduce the tempe-

rature recommended for the

selected programme, and even

to set a cold wash cycle (

Spin exclusion knob

It is used to exclude the spin cycle

(by choosing symbol

) or to re-

duce the spin speed of the selected

programme. The maximum speed

for the four types of fabric are:

Fabric Speed

Cotton 1000 rpm

Synthetics 800 rpm

Wool 600 rpm

Silk no

Note: distribution phase will be

carried out at low speed.

Detergent dispenser

It is divided into 3 compartments:

1.Detergent for pre-wash;

2.Detergent for the main cycle

wash;

3. Fabric conditioner.

The washing machine is

equipped with an extra

compartment 4 (provided as an

accessory) for the bleach, to be

inserted in compartment 1.

Instructions for installation and use

On-off

When button I is pressed, the

washing machine is switched

on, when it is not the machine

is switched off.

Turning the appliance off

does not cancel the selected

programme.

The on-off lamp

Lamp L flashes when the

appliance is switched on and

awaiting a programme to be set.

A steady light means the

appliance has accepted the

selected programme.

The door block lamp

The safety lamp indicates that the

washing machine door is locked

to prevent it from being opened

accidentally. To avoid any

damages to lock mechanism,

you must wait for the lamp to

extinguish, before attempting to

open the door which takes around

three minutes.

The detergent dispenser with the

additional bleach compartment

is here.

1 2 3 4 5 ... 16

Comments to this Manuals

No comments

Indesit WA105 User Manual Page 4

Comments to this Manuals

Related products and manuals for Washers Indesit WA105