Indesit WE 13 User Manual download pdf (Page 12)

Instructions for installation and use

11

Removing the plug:

If your appliance has a non-

rewireable moulded plug and you

should wish to re-route the mains

cable through partitions, units

etc., please ensure that either:

the plug is replaced by a fused

13 ampere re-wearable plug

bearing the BSI mark of approval.

or:

the mains cable is wired directly

into a 13 amp cable outlet,

controlled by a switch, (in

compliance with BS 5733) which

is accessible without moving the

appliance.

Disposing of the plug:

Ensure that before disposing of

the plug itself, you make the pins

unusable so that it cannot be

accidentally inserted into a

socket.

Instructions for connecting

cable to an alternative plug:

Important: the wires in the

mains lead are coloured in

accordance with the following

code:

Green & Yellow Earth

Blue Neutral

Brown Live

As the colours of the wires in the

lead may not correspond with the

coloured markings identifyng the

terminals in your plug, proceed as

follows:

Connect Green & Yellow wire to

terminal marked E or

or

coloured Green or Green & Yellow.

Connect Brown wire to terminal

marked L or coloured Red.

Connect Blue wire to terminal

marked N or coloured Black.

If a 13 amp plug (BS 1363) is used

it must be fitted with a

13 amp fuse, either in the plug or

adaptor or at the distribution board.

If you are in any doubt the

electrical supply to your machine,

consult a qualified electrician

before use.

How to connect an alternati-

ve plug:

The wires in this mains lead are

coloured in accordance with the

following code:

BLUE NEUTRAL (N)

BROWN LIVE (L)

GREEN & YELLOW EARTH (E)

Disposing of the appliance:

When disposing of the appliance

please remove the plug by

cutting the mains cable as close

as possible to the plug body and

dispose of it as described above.

GREEN &

YELLOW

BROWN

BLUE

13 ampere fuse

CROSS-BAR

CORD GRIP

1 ... 11 12 13 14 15 16

Comments to this Manuals

No comments