Indesit IWE 61051 C ECO EU Instruction for Use download pdf (Page 9)

Wash cycles and options

Wash options

- If the selected option is not compatible with the

programmed wash cycle, the indicator light will flash and

the option will not be activated.

- If the selected option is not compatible with another

option which has been selected previously, the indicator

light corresponding to the first option selected will flash

and only the second option will be activated; the indicator

light corresponding to the enabled option will remain lit.

Selecting this option enables you to suitably adjust drum

rotation, temperature and water to a reduced load of lightly

soiled cotton and synthetic fabrics (refer to the “Programme

table”). “ ” enables you to wash in less time thereby

saving water and electricity. We suggest using a liquid

detergent suitably measured out to the load quantity.

The function saves energy by not heating the

water used to wash your laundry - an advantage both to the

environment and to your energy bill.

Table of wash cycles

Instead, intensified wash action and water optimisation

ensure great wash results in the same average time of a

standard cycle.

For the best washing results we recommend the usage of a

liquid detergent.

Extra Rinse

By selecting this option, the efficiency of the rinse is increased

and optimal detergent removal is guaranteed. It is particularly

useful for sensitive skin.

Easy Iron

By selecting this function, the wash and spin cycles will be

modified in order to reduce the formation of creases. At the

end of the cycle the washing machine will perform slow ro-

tations of the drum; the indicator lights for the EASY IRON

and START/PAUSE options will flash (the first one green, the

second orange). To end the cycle, press the START/PAUSE

button or the EASY IRON button. For the 9 wash cycle, the

machine will end the cycle while the laundry is soaking and

the EASY IRON and START/PAUSE indicator lights will flash.

To drain the water so that the laundry may be removed, press

the START/PAUSE button or the EASY IRON button.

Wash cycles

Description of the wash cycle

Max.

temp.

(°C)

Max.

speed

(rpm)

Detergents

Max.

load (kg)

Residual

dampness %

Energy

consum-

ption kWh

Total water lt

Cycle

duration

Pre-

wash

Wash

Fabric

softener

Daily

Cotton with prewash: extremely soiled whites.

90°

1000

  

62 1,90 68 155’

Cotton Standard 60° (1): heavily soiled whites and resistant colours.

60°

(Max. 90°)

1000

 

62 1,01 49,8 195’

Cotton Standard 40° (2): lightly soiled whites and delicate colours.

40°

1000

 

62 0,86 52 185’

Synthetics: heavily soiled resistant colours.

60°

800

 

44 0,78 33 105’

Synthetics (3): lightly soiled resistant colours.

40°

800

 

44 0,49 38 95’

Mix Colored: lightly soiled whites and delicate colours.

40°

1000

 

62 0,86 56 95’

20° Zone

Cotton Standard 20°: lightly soiled whites and delicate colours.

20°

1000

 

- - - 170’

7 Mix Light

20°

800

 

- - - 120’

8 20’ Refresh

20°

800

 

1,5

- - - 20’

Special

Silk/Curtains: for garments in silk and viscose, lingerie.

30°

 

- - - 55’

Wool: for wool, cashmere, etc.

40°

800

 

1,5

- - - 70’

11 Jeans

40°

800

 

- - - 75’

Sport

12 Sport Intensive

30° 600 -

 

- - - 85’

13 Sport Light

30° 600 -

 

- - - 60’

14 Sport Shoes

30° 600 -

 

Max. 2

Pairs

- - - 55’

Partial wash cycles

Rinse

1000

- -



- - - 36’

Spin + Drain

1000

- - - 6

- - - 10’

Drain only *

OFF

- - - 6

- - - 3’

* If you select programme and exclude the spin cycle, the machine will drain only.

The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to factors such as

water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.

1) Test wash cycle in compliance with regulation 1061/2010: set wash cycle 2 with a temperature of 60°C.

This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments

which can be washed at 60°C. The actual washing temperature may differ from the indicated value.

2) Test wash cycle in compliance with regulation 1061/2010: set wash cycle 3 with a temperature of 40°C.

This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments