Indesit RDSG 86207 S EU Instruction for Use download pdf (Page 4)

4

GB

Care and maintenance

Cutting off the water and

electricity supplies

•Turnoffthewatertapaftereverywashcycle.

This will limit wear on the hydraulic system

inside the washer-dryer and help to prevent

leaks.

•Unplugthewasher-dryerwhencleaningit

and during all maintenance work.

Cleaning the washer-dryer

•Theouterpartsandrubbercomponents

of the appliance can be cleaned using a soft

cloth soaked in lukewarm soapy water. Do not

use solvents or abrasives.

•Thewasher-dryerhasaautoclean

programme for its internal parts that must be

run with no load in the drum.

To help the wash cycle

you may want to use

either the detergent

(i.e. a quantity 10% the

quantity specified for

lightly-soiled garments)

or special additives

to clean the washer-

dryer. We recommend

running a cleaning

programme every 40 wash cycles.

To start the programme press button A for 5

seconds (see figure).

The programme will start automatically and will

run for about 70 minutes. To stop the cycle

press the START/PAUSE button.

Cleaning the detergent dispenser

drawer

Remove the dispenser

by raising it and

pulling it out (see

figure).

Wash it under running

water; this operation

should be repeated

frequently.

1

2

Caring for the door and drum of

your appliance

•Alwaysleavetheportholedoorajarinorder

to prevent unpleasant odours from forming.

Cleaning the pump

The washer-dryer is fitted with a self-cleaning

pump which does not require any maintenance.

Sometimes, small items (such as coins or

buttons) may fall into the pre-chamber which

protects the pump, situated in its bottom part.

! Make sure the wash cycle has finished and

unplug the appliance.

To access the pre-chamber:

1. using a

screwdriver, remove

the cover panel on

the lower front part of

the washer-dryer (see

figure);

2. unscrew the lid

by rotating it anti-

clockwise (see figure):

a little water may

trickle out. This is

perfectly normal;

3. clean the inside thoroughly;

4. screw the lid back on;

5. reposition the panel, making sure the hooks

are securely in place before you push it onto

the appliance.

Checking the water inlet hose

Check the inlet hose at least once a year. If

there are any cracks, it should be replaced

immediately: during the wash cycles, water

pressure is very strong and a cracked hose

could easily split open.

! Never use second-hand hoses.

A

1 2 3 4 5 ... 36

Comments to this Manuals

No comments