Indesit DSIE 2B10 UK User's Guide Page 6

  • Download
  • Add to my manuals
  • Print
  • Page
    / 8
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 5
6
CLEANING THE FILTER ASSEMBLY
Regularly clean the  lter assembly so that the  lters do not clog and
that the waste water  ows away correctly.
The  lter assembly consists of three  lters which remove food residues
from the washing water and then recirculate the water: to obtain the
best washing results, you need to keep them clean.
The dishwasher must not be used without  lters or if the  lter is
loose.
After several washes, check the  lter assembly and if necessary clean it
thoroughly under running water, using a non-metallic brush and follo-
wing the instructions below:
1. Turn the cylindrical  lter A in an anti-clockwise direction and pull
it out (Fig 1).
2. Remove the cup  lter B by exerting a slight pressure on the side
aps (Fig 2).
3. Slide out the stainless-steel plate  lter C (Fig 3).
4. Inspect the trap and remove any food residues. NEVER REMOVE
the wash-cycle pump protection (black detail) (Fig 4).
After cleaning the  lters, re-place the  lter assembly and  x it in
position correctly; this is essential for maintaining the e cient
operation of the dishwasher.
A
A
B
C
CLEANING THE SPRAY ARMS
On occasions, food residue may become encrusted onto the spray
arms and block the holes used to spray the water. It is therefore recom-
mended that you check the arms from time to time and clean them
with a small non-metallic brush.
To remove the upper spray arm, turn the plastic locking ring in an
anti-clockwise direction. The upper spray arm should be replaced so
that the side with the greater number of holes is facing upwards.
The lower spray arm may be removed by pulling it upwards.
CLEANING THE WATER INLET HOSE
If the water hoses are new or have not been used for an extended
period of time, let the water run to make sure it is clear and free of
impurities before performing the necessary connections. If this
precaution is not taken, the water inlet could become blocked and da-
mage the dishwasher.
CARE AND MAINTENANCE
1 2
3 4
Page view 5
1 2 3 4 5 6 7 8

Comments to this Manuals

No comments