Indesit IDE 750 User Manual

DISHWASHERIDE 750ContentsInstallation, 2-3-4Positioning and levellingConnecting the water and electricity suppliesTechnical dataElectrical ConnectionD

10ENShutting off the water and electricitysupplies• Turn off the water tap after every wash cycle toavoid leaks.• Remove the plug from the socket when

11ENThe appliance was designed and manufacturedin compliance with current international safetystandards. The following information has beenprovided fo

12ENTroubleshootingMalfunction: Possible causes / Solutions: The dishwasher does not start.  The plug has not been inserted into the electrical soc

2EN Keep this instruction manual in a safe place forfuture reference. If the appliance is sold, given awayor moved, please ensure the manual is kept

3ENConnecting the water outlet hoseConnect the outlet hose (without bending it) to adrain duct with a minimum diameter of 4 cm.Alternatively, rest it

4ENElectrical ConnectionIf your appliance is supplied with a 13 amp. fusedplug it can be plugged into a 13 amp socket forimmediate use. Before using t

5ENOverall view1. Upper rack2. Upper sprayer arm3. Tip-up compartments4. Rack height adjuster5. Lower rack6. Lower sprayer arm7. Cutlery basket8. Wash

6ENIf the rack is equipped with the clickclack handles* (see figure), pullthem upwards or downwards toadjust the height.Loading examples for the uppe

7ENABDCStart-up and useStarting the dishwasher1. Turn the water tap on.2. Press the ON/OFF button: the display will light up.3. Measure out the deterg

8ENWash cycle tableNoteTo make it easier to measure out the detergent, it is worth remembering that:1 tablespoon = 15 grams of powder = approximately

9ENOnly use products that have been specifically designedfor dishwashers.Do not use table salt or industrial salt. If using a multi-functional produc