Indesit IDL 730 User Manual download pdf (Page 7)

Loading the Dishwasher

Before placing the dishes in the racks, remove the largest

scraps of food left over on your plates, you will thus avoid

blocking the filter, which would reduce the efficacy of the

wash.

If the saucepans and frying pans are very dirty, allow them

to soak before being washed.

You will thus avoid having to wash them again.

To make it easier to load your dishes, pull the racks out

fully.

How to use the lower rack

We recommend you place the most difficult dishes to wash

into the lower rack:

pans, lids, dinner plates and soup plates as illustrated in

the figure to the left.

Serving dishes and large lids should preferably be placed

on the sides of the rack, without for that matter obstructing

the rotation of the top sprayer arm.

- pans, salad bowls etc. must always be placed upside

down

- very deep dishes should be placed obliquely, thus allowing

water to run down them freely.

- Insert the cutlery into the basket: knives and utensils

with sharp blades or tips should be positioned with the

sharp parts at the bottom. Position all cutlery items so that

they don't touch.

If the rack has side baskets, the spoons should be loaded

individually into the appropriate slots (see fig. A).

- Especially long utensils should be placed in the horizon-

tal position at the front of the upper rack.

How to use the upper rack

Place delicate and lightweight dishes in the upper rack:

glasses, tea cups and coffee cups, saucers - but plates too

- shallow salad bowls, slightly dirty frying pans and shallow

pans (the photo illustrates a few examples).

Position lightweight dishes in such as way as to avoid their

being moved by the spray of water.

The upper rack can be equipped with one or two special

tip-up compartments for mugs and cups, as well as spoons,

knives and forks, which should be fitted in the slots provided.

Stemmed glasses can be hooked onto these compartments

by threading the stems into the slots provided (see fig. D).

After loading the dishes, remember to check that the blades

on the sprayer arms can turn freely without knocking against

any dishes.

How to adjust the upper rack ….

The upper rack can be set in a high or low position. To do

so, open the rail stop flaps and pull the rack out completely;

now place it with the back wheels in high or low position,

then slide it along the guide rails until the front wheels

also go in; now close the rail stop flaps (see fig. F).

Bottom Rack

Top Rack

Load examples

Fig. F

fig. D

1 2 3 4 5 6 7 8 ... 16

Comments to this Manuals

No comments

Indesit IDL 730 User Manual Page 7

Comments to this Manuals

Related products and manuals for Dishwashers Indesit IDL 730