Indesit TIP 633 T L Instruction for Use download pdf (Page 14)

Care and maintenance

Switching the appliance off

Disconnect your appliance from the electricity supply before

carrying out any work on it.

Cleaning the appliance

! Do not use abrasive or corrosive detergents (for example,

products in spray cans for cleaning barbecues and ovens),

stain removers, anti-rust products, powder detergents or

sponges with abrasive surfaces: these may scratch the

surface beyond repair.

! Never use steam cleaners or pressure cleaners on the

appliance.

• It is usually sufficient simply to wash the hob using a damp

sponge and dry it with absorbent kitchen towel.

• If the hob is particularly dirty, rub it with a special glass

ceramic cleaning product, then rinse well and dry

thoroughly.

• To remove more stubborn dirt, use the scraper provided.

Remove spills as soon as possible, without waiting for

the appliance to cool, to avoid residues forming crusty

deposits. You can obtain excellent results by using a rust-

proof steel wire sponge - specifically designed for glass

ceramic surfaces - soaked in soapy water.

! The scraper provided is sharp: be careful when using it.

• If any plastic or sugary substances are accidentally

melted on the hob, remove them immediately with the

scraper, while the surface is still hot.

• Once it is clean, the hob may be treated with a special

protective maintenance product: the invisible film left

by this product protects the surface from drips during

cooking. This maintenance task should be carried out

while the appliance is warm (not hot) or cold.

• Always remember to rinse the appliance well with clean

water and dry it thoroughly: residues can become

encrusted during subsequent cooking processes.

Stainless steel frame (only in models with outer frame)

Stainless steel can be marked by hard water which has been

left on the surface for a long time, or by cleaning products

containing phosphorus.

After cleaning, it is advisable to rinse the surface well and dry

it thoroughly. If water is spilt on the surface, dry it quickly and

thoroughly.

! Some hobs have an aluminium frame which is similar to

stainless steel. Do not use any cleaning or degreasing

products which are not suitable for use with aluminium.

Disassembling the hob

If it is necessary to disassemble the hob:

1. Loosen the screws fixing the alignment springs on each

side.

2. Loosen the screws holding the fixing hooks in each corner.

3. Take the hob out of its installation cavity.

! Do not attempt to repair the appliance yourself. If the

appliance breaks down, contact a Service Centre.

Technical description of the models

The induction system is the quickest existing way of cooking. Unlike traditional hotplates where the cooking zone

heats up, with the induction system heat is generated directly inside pans which have ferromagnetic bases.

Key:

I = single induction

cooking zone

B = booster: the power of

the cooking zone may be

boosted to 3000 W

* = the maximum power

level is limited while the

booster is activated for

the relevant rear cooking

zone (see Start-up and

use).

Hobs

Cooking zone

Back Left

Back Right

Front Left

Total power

TIP 633 O L

Power (W)

I 1400 - B 2000* - 600 if Front. Left*

I 2200 - B 3000

I 2200 - B 3000* - 1600 if Back. Left *

6600

Hobs

Cooking zone

Back Left

Back Right

Front Left

Total power

TIP 733 T O L

Power (W)

I 1400 (600) - B 2000

I 2000 - B 3000

I 2000 (1600) - B 3000

6600

TIP 633 T L; TIP 633 T L (SL)

TIL 633 T; TIP 633 T L (MT)

Power (W)

I 1400 - B 2000* - 600 if Front. Left*

I 3000 - B 4000

I 2200 - B 3000* - 1600 if Back. Left *

7600

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 79 80

Comments to this Manuals

No comments

Indesit TIP 633 T L Instruction for Use Page 14

Comments to this Manuals

Related products and manuals for Hobs Indesit TIP 633 T L