Indesit TIS 621 CT L S Instruction for Use download pdf (Page 15)

The EXTENSO TECHNOLOGY mode

The EXTENSO TECHNOLOGY can be used to set the

power of two „interconnected” hotplates to the same

level. It can be activated if the two hotplates are OFF,

by pressing the

EXTENSO TECHNOLOGY button

The

EXTENSO TECHNOLOGY can be activated

while the hob is on by pressing the

EXTENSO

TECHNOLOGY

button once; the LEDs corresponding

to both linked hotplates light up.

The 2 LEDs remain lit as long as the hotplates are

linked (if

EXTENSO TECHNOLOGY button is pressed

again, the hotplates are disconnected and are both set

to power level 0).

Pressing the +, - or Max buttons for one of the two Flexi

hotplates also affects the display corresponding to the

other hotplate.

To deactivate the

EXTENSO TECHNOLOGY , press

the button .

A timer may be set for the

EXTENSO TECHNOLOGY;

this appears on the display and both LEDs

corresponding to the linked hotplates light up. When

the Timer button is pressed, the two linked hotplates

are treated as if they were a single zone.

Selecting and using

EXTENSO TECHNOLOGY

To begin using the EXTENSO TECHNOLOGY, press

the button. To set the power level (see above).

EXTENSO TECHNOLOGY operation

Once you have selected

EXTENSO TECHNOLOGY

by pressing the button , the 2 LEDs corresponding

to the

EXTENSO TECHNOLOGY for both hotplates

light up; it will then be possible to control both as if

they were a single zone. The power level will appear

on both displays. If only the upper or lower part is in

use, the display corresponding to the unused zone

will begin to ﬂ ash, and after 3 minutes cooking will

automatically revert to standard mode (not

EXTENSO

TECHNOLOGY

! Once activated, the

EXTENSO TECHNOLOGY can

also be programmed, using the same procedure as

described for the individual hotplates.

To exit this mode, follow the procedure described above.

The display will show the text DE and OF and the hob will

be switched off. When it is next switched on, the hob will

function normally.

! Accessories

For optimal

EXTENSO TECHNOLOGY performance,

we recommend the use of pans with an elliptical

or elongated base and a major diameter of at least

250 mm; if using pans with a smaller diameter, we

recommend positioning them in the upper or lower part

as indicated by the X symbol.

If the saucepan is not in the centre of the screen

printing detail, you may hear a whistling sound or

a slight buzzing noise; this does not indicate a hob

malfunction. We recommend adjusting the position

of the pan so that it is in the centre of the EXTENSO

TECHNOLOGY zone

1 ... 14 15 16 ... 80

Comments to this Manuals

No comments

Indesit TIS 621 CT L S Instruction for Use Page 15

Comments to this Manuals

Related products and manuals for Hobs Indesit TIS 621 CT L S