Indesit TIC 740 DD L IT Instruction for Use download pdf (Page 27)

Programming the cooking duration

! All the cooking zones may be programmed

simultaneously, for a duration between 1 and 99 minutes.

1. Select the cooking zone using the corresponding

selector button.

Adjust the power level.

3. Press the

programming button. The indicator

light corresponding to the selected zone will start

flashing.

4. Set the cooking duration using the

- and

buttons.

5. Confirm by pressing the

button or automatic

selection occurs after 10 seconds.

The timer begins counting down immediately. A buzzer

sounds for approximately 1 minute and the cooking zone

switches off when the set programme has finished.

Repeat the above procedure for each hotplate you wish to

programme.

Using multiple programmes and the display

If one or more hotplates are programmed, the display will

show the data for the hotplate with the least time remaining,

and the light corresponding to the position of the hotplate

will flash. The lights corresponding to the other hotplates

programmed will be switched on.

To visualise the time remaining for the other

programmed hotplates, press the

button

repeatedly: the time remaining for

each hotplate will be shown

sequentially in clockwise order,

starting from the front left hotplate.

Changing the programme

1. Press the

button repeatedly until the duration you

wish to change is shown.

2. Use the

- and

buttons to set the new duration.

3. Confirm by pressing the

button.

To cancel a programme, follow the above instructions. At

step 2, press the

- button: the duration decreases

progressively until it reaches 0 and switches off. The

programme resets and the display exits programming

mode.

Timer

The hob must be switched on.

The timer can be used to set a duration up to 99 minutes.

1. Press the

programming button until the timer

indicator light is illuminated

2. Set the desired duration using the

- and

+ buttons.

3. Confirm by pressing the

button.

The timer begins counting down immediately. When the

time has elapsed, a buzzer will sound (for one minute).

Control panel lock

When the hob is switched on, it is possible to lock the oven

controls in order to avoid accidental changes being made

to the settings (by children, during cleaning, etc.). Press

the

button to lock the control panel: the indicator light

above the button will switch on.

To use any of the controls (e.g. to stop cooking), you must

switch off this function. Press the

button for a few

moments, the indicator light will switch off and the lock

function will be removed.

Switching off the hob

Press the button to switch the appliance off.

If the control panel lock has been activated, the controls will

continue to be locked even after the hob is switched on

again. In order to switch the hob on again, you must first

remove the lock function.

“Demo” mode

It is possible to set the hob to a demonstration mode where

all the controls work normally but the heating elements do

not switch on. To activate the “demo” mode the hob must

be switched on, with all the hotplates switched off.

• Press and hold the

+ and

- buttons simultaneously

for 6 seconds. When the 6 seconds have elapsed, the

ON/OFF and CONTROLS LOCKED indicator lights will

flash for one second. Release the

+ and

- buttons

and press the

button;

• The display will show the text DE and MO and the hob

will be switched off.

• When the hob is switched on again it will be set to the

“demo” mode.

To exit this mode, follow the procedure described above.

The display will show the text DE and OF and the hob will

be switched off. When it is next switched on, the hob will

function normally.

1 ... 26 27 28 ... 52

Comments to this Manuals

No comments

Indesit TIC 740 DD L IT Instruction for Use Page 27

Comments to this Manuals

Related products and manuals for Unknown Indesit TIC 740 DD L IT