Indesit WITL 1051 User Manual download pdf (Page 21)

Personalisations

Setting the temperature

Turn the TEMPERATURE knob to set the wash temperature.

The temperature can be lowered, or even set to a cold wash ( ).

Setting the spin speed

Turn the SPIN SPEED knob to set the spin speed for the programme selected.

The maximum spin speeds for each programme are as follows:

Programmes Maximum spin speed

Cottone 1000 rpm

Synthetics 800 rpm

Wool 800 rpm

Silk no

The spin speed can be lowered, or the spin cycle can be excluded altogether by selecting symbol .

The washing machine will automatically prevent you from selecting a spin speed higher than the maximum speed for each

programme.

Note. To avoid excessive vibrations, before every spin cycle the machine distributes the load in a uniform manner by conti-

nuously rotating the drum at a speed which is slightly faster than the normal washing speed.

When, despite repeated attempts, the load is still not evenly distributed, the machine spins at a lower speed than the set

frequency.

If the load is excessively unbalanced, the machine attempts to distribute it instead of spinning.

The balancing attempts may extend the total duration of the cycle, up to a maximum of 10 minutes.

Functions

To enable a function:

1. press the button corresponding to the desired function, according to the table below;

2. the function is enabled when the corresponding button is illuminated.

Note: The rapid flashing of the button indicates that the corresponding function cannot be selected for the programme set.

Option Effect Comments Enabled with

programmes:

Delay Timer

Delays the start of the

wash by up to 9 hours.

Pess the button repeatedly until the LED corresponding to the

desired delay is turned on. The fifth time the button is pressed, the

function will be disabled.

N.B.: Once you have pressed the Start/Reset button, the delay

can only be decreased if you wish to modify it.

All

Bleaching

Bleaching cycle de-

signed to remove the

toughest stains.

Please remember to pour the bleach into extra compartment 4

(see page 22).

This option is incompatible with the EASY IRON option.

2, 3, 4,

, ,

8 and

Rinse cycle.

Easy iron

By selecting this

function, the wash

and spin cycles will be

modified in order to

reduce the formation of

creases.

At the end of the cycle

the washing machine

will perform slow

rotations of the drum.

To drain the water so that the laundry may be removed, press the

START/PAUSE button.

This option is incompatible with the BLEACHING option.

1, 2, 3, 4,

, 8, 9, 10, 11.

Extra Rinse

Increases the efficiency

of the rinse.

Recommended when the appliance has a full load or with large

quantities of detergent.

1, 2, 3, 4, ,

, 7, 8, 9, 10,

11, 13, 14, and

Rinse cycle.

1 ... 20 21 22 ... 48

Comments to this Manuals

No comments

Indesit WITL 1051 User Manual Page 21

Comments to this Manuals

Related products and manuals for Washers Indesit WITL 1051