Indesit RG 864 S UK Instruction for Use download pdf (Page 10)

How to run a wash cycle or a

drying cycle

1. SWITCH THE MACHINE ON. Press the button;

the START/PAUSE indicator light will flash slowly in a

green colour.

2. LOAD THE LAUNDRY. Open the porthole door.

Load the laundry, making sure you do not exceed

the maximum load value indicated in the table of

programmes and wash cycles on the following page.

3. MEASURE OUT THE DETERGENT. Pull out the

detergent dispenser drawer and pour the detergent into

the relevant compartments as described in “Detergents

and laundry”.

4. CLOSE THE DOOR.

5. SELECT THE WASH CYCLE. Use the WASH CYCLE

SELECTOR knob to select the desired wash cycle. A

temperature and spin speed is set for each wash cycle;

these values may be adjusted. The duration of the cycle

will appear on the display.

6. CUSTOMISE THE WASH CYCLE. Use the relevant

buttons:

Modify the temperature and/or spin speed.

The machine automatically displays the maximum

temperature and spin speed values set for the selected

cycle, or the most recently-used settings if they are

compatible with the selected cycle. The temperature

can be decreased by pressing the button, until

the cold wash “OFF” setting is reached. The spin

speed may be progressively reduced by pressing

the button, until it is completely excluded (the

“OFF” setting). If these buttons are pressed again, the

maximum values are restored.

! Exception: if the 7 programme is selected, the

temperature can be increased up to a value of 90°C.

! Exception: if the 9 programme is selected, the

temperature can be increased up to a value of 60°C.

Setting the drying cycle

The first time the button is pressed, the machine will

automatically select the maximum drying cycle which is

compatible with the selected wash cycle. Subsequent

presses will decrease the drying level and then the drying

time, until the cycle is excluded completely (“OFF”).

Drying may be set as follows:

A- Based on the desired laundry dryness level:

Iron “A1”: suitable for clothes which will need ironing

afterwards. the remaining dampness softens creases,

making them easier to remove.

Hanger “A2”: ideal for clothes which do not need to be

dried fully.

Cupboard “A3”: suitable for laundry which can be put

back in a cupboard without being ironed.

B - Based on a set time period: between 30 and 210

minutes.

If your laundry load to be washed and dried is much

greater than the maximum stated load, perform the

wash cycle, and when the cycle is complete, divide the

garments into groups and put some of them back in

the drum. At this point, follow the instructions provided

for a “Dry only” cycle. Repeat this procedure for the

remainder of the load. A cooling-down period is always

added to the end of each drying cycle.

Dry only

Press button to perform the drying-only cycle.

After selecting the desired cycle (compatible with the type

of garments), press button to exclude the washing

phase and start the drying phase at the maximum level

for the selected cycle. The drying level or time may be

set and changed by pressing the drying button . (Not

compatible with cycles 1-2-3-4 and 14).

Setting a delayed start.

To set a delayed start for the selected cycle, press the

corresponding button repeatedly until the required delay

period has been reached. To remove the delayed start

setting, press the button until the text “OFF” appears on

the display.

Set the desired wash intensity.

Option makes it possible to optimise washing

based on the level of soil in the fabrics and on desired

wash cycle intensity. For heavily-soiled garments press

button until the “Intensive” level is reached. This

level ensures a high-performance wash due to a larger

quantity of water used in the initial phase of the cycle

and due to increased drum rotation. It is useful when

removing the most stubborn stains.

For lightly-soiled garments or a more delicate treatment

of the fabrics, press button until the “Délicate”

level is reached. The cycle will reduce drum rotation

to ensure washing results that are perfect for delicate

garments.

7. START THE WASH CYCLE. Press the START/

PAUSE button. The corresponding indicator light will

turn green, remaining lit in a fixed manner, and the

door will be locked (the DOOR LOCKED symbol will

be lit). To change a wash cycle while it is in progress,

pause the washer-dryer using the START/PAUSE

button (the START/PAUSE indicator light will flash

slowly in an amber colour); then select the desired cycle

and press the START/PAUSE button again.

To open the door while a cycle is in progress, press

the START/PAUSE button; if the DOOR LOCKED

symbol is switched off the door may be opened. Press

the START/PAUSE button again to restart the wash

cycle from the point at which it was interrupted.

8. THE END OF THE WASH CYCLE. This will be

indicated by the text “END” on the display; when the

DOOR LOCKED symbol switches off the door may

be opened. Open the door, unload the laundry and

switch off the machine.

! If you wish to cancel a cycle which has already begun,

press and hold the button. The cycle will be stopped

and the machine will switch off.

1 ... 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Indesit RG 864 S UK Instruction for Use Page 10

Comments to this Manuals

Related products and manuals for Washing machines Indesit RG 864 S UK