Indesit TGL 751 (G) Instruction for Use download pdf (Page 18)

! The position of the corresponding gas burner or

electric hotplate is shown on every knob.

Gas burners

Each burner can be adjusted to one of the following

settings using the corresponding control knob:

0 Off

Maximum

Minimum

To light one of the burners, hold a lit match or lighter

near the burner and, at the same time, press down

and turn the corresponding knob anti-clockwise to

the maximum setting.

Since the burner is fitted with a safety device, the

knob should be pressed for approximately 2-3

seconds to allow the automatic device keeping the

flame alight to heat up.

When using models with an ignition button, light the

desired burner pressing down the corresponding

knob as far as possible and turning it anticlockwise

towards the maximum setting.

! If a flame is accidentally extinguished, turn off the

control knob and wait for at least 1 minute before

trying to relight it.

To switch off the burner, turn the knob in a clockwise

direction until it stops (when reaches the “0”

position).

The “separate double flame” burner*

This burner consists of two concentric burners which

can operate either together or separately.

Use of the double flame on the maximum setting

gives a very high power which reduces cooking

times with respect to conventional burners.

Moreover the double flame crown provides a more

uniform distribution of heat on the bottom of the pan,

when using both burners on minimum.

To ensure that the double-flame burner is used to its

full potential, never set the inside ring to minimum

and the outside ring to maximum at the same time.

Pots and pans of all sizes can be used. In the case

of the smaller pots and pans we recommend the use

of only the internal burner.

There is a separate control knob for each of the

“separate double flame” burners.

The knob marked by the symbol

operates the

external burner;

The knob marked by the symbol

operates the

internal burner.

To turn on one of the rings, press the relative knob in

all the way and turn it anti-clockwise to the high

setting

. The burner is fitted with an electronic

igniter that automatically starts when the knob is

pressed in.

Since the burner is equipped with a safety device,

after lighting the burner keep the knob pressed in for

about 2-3 seconds to allow the device which keeps

the flame lit automatically to heat up.

The selected burner can be regulated using the

corresponding knob, as follows:

0 Off

Maximum

Minimum

To switch off the burner, turn the knob in a clockwise

Start-up and use

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 47 48

Comments to this Manuals

No comments

Indesit TGL 751 (G) Instruction for Use Page 18

Comments to this Manuals

Related products and manuals for Hobs Indesit TGL 751 (G)