Indesit OL 1038 LI RFH (CF) Instruction for Use download pdf (Page 8)

3. Secure the cable by fastening the clamp screw.

4. Close the cover of the terminal board.

Connecting the supply cable to the mains

Install a standardised plug corresponding to the load

indicated on the data plate (see table).

The appliance must be directly connected to the mains using

an omnipolar switch with a minimum contact opening of 3

mm installed between the appliance and the mains. The

switch must be suitable for the charge indicated and must

comply with current electrical regulations (the earthing wire

must not be interrupted by the switch). The supply cable

must be positioned so that it does not come into contact

with temperatures higher than 50°C at any point (the back

panel of the oven, for example).

! The installer must ensure that the correct electrical

connection has been performed and that it is fully compliant

with safety regulations.

Before connecting the appliance to the power supply, make

sure that

• the appliance is earthed and the plug is compliant with

the law.

• the socket can withstand the maximum power of the

appliance, which is indicated on the data plate.

• the voltage is in the range between the values indicated

on the data plate.

• the socket is compatible with the plug of the appliance.

If the socket is incompatible with the plug, ask an

authorised technician to replace it. Do not use extension

cords or multiple sockets.

! Once the appliance has been installed, the power supply

cable and the electrical socket must be easily accessible.

! The cable must not be bent or compressed.

! The cable must be checked regularly and replaced by

authorised technicians only (see Assistance).

! The manufacturer declines any liability should these

safety measures not be observed.

APPLIANCE SPECIFICATIONS

Dimensions*

width 43.5 cm

height 32,4 cm

depth 41.5 cm

Volume*

59 l

Dimensions**

width 45.5 cm

height 32,4 cm

depth 41.5 cm

Volume**

62 l

Electrical

connections

voltage: 220 - 240 V~ 50/60 Hz or

50 Hz (see data plate)

maximum power absorbed

2800 W

ENERGY

LABEL

Directive 2002/40/EC on the label

of electric ovens. Standard EN 50304

Declared energy consumption

for Forced convection Class –

heating mode:

ECO.

* Only for models with drawn rails.

** Only for models with wire rails.

This appliance conforms to the following

European Economic Community

directives:

- 2006/95/EEC dated 12/12/06 (Low

Voltage) and subsequent amendments.

- 2004/108/EEC dated 03/05/89

(Electromagnetic Compatibility) and

subsequent amendments.

- 93/68/EEC dated 22/07/93 and

subsequent amendments.

- 2012/19/EC and subsequent

amendments.

- 1275/2008 standby/off mode.

1 2 3 4 5 6 7 8 9 ... 40

Comments to this Manuals

No comments

Indesit OL 1038 LI RFH (CF) Instruction for Use Page 8

Comments to this Manuals

Related products and manuals for Ovens Indesit OL 1038 LI RFH (CF)