2
TEMPERATURE SETTING
Press the Temperature button on the control panel to
adjust the temperature from the warmest through the lower
to the coldest level.
Pressing the Temperature button, the temperature
setting will change cyclically. At rst plug-in of appliance
temperature setpoint is present at medium position (factory
setting).
Following table shows temperature setpoints:
Note: Displayed set points correspond to the average temperature
throughout the whole refrigerator.
6TH SENSE
This function automatically works to ensure the optimal
conditions to preserve the stored food. The “6th Sense”
function is automatically activated when:
• a large amount of food is loaded into the refrigerator
• the refrigerator door is left open for a long time
ALARM TYPE
Door open alarm
Door open alarm
Malfunction
SIGNAL
Refrigerator Light blinks
Refrigerator Light OFF
Any temperature indicators
blinks
CAUSE
The door has remained open
for more than 5 minutes.
The door has remained open
for more than 8 minutes.
Product malfunction.
CURE
Close the door
Close the door
Contact the After-sales
Service
DAILY USE
FUNCTIONS
ALARM TABLE
FIRST TIME USE
HOW TO START THE APPLIANCE
After plugging the appliance to the mains, it starts the
operation automatically. After starting the appliance, wait at
least 4-6 hours before placing food into the fridge and into
the freezer compartment.
ACCESSORIES
See Use and Care Guide for more details on functions / see last
page for information on how to obtain the Use and Care Guide
HIGH TEMP.
MEDIUM TEMP.
LOW TEMP.
MED-HIGH TEMP.
MED-LOW TEMP.
FAST COOLING
Led on Led o
EGG TRAY BOTTLE SEPARATOR ICE TRAY
When the appliance is connected to the power supply, the
display lights up and all the icons appear on the display for
approximately 1 second. The default (factory) values of the
fridge compartment settings light-up.
• a prolonged power failure takes place, causing the
internal temperature of the appliance to increase to
values that cannot guarantee safe storage of food.
FAST COOLING
The use of the Fast Cooling function is recommended to
increase the cooling capacity of the refrigerator compartment
when placing a very high quantity of food within it.
To activate the Fast Cooling function, press and hold for 3
seconds the Temperature button on the control panel till
all the 3 LEDs will turn on.
The function is automatically deactivated after 24 hours and
return to previous selected set point.
The function can be manually deactivated by pressing and
holding for 3 seconds the Temperature button on the control
panel.
REFRIGERATOR LIGHT
The light system inside the refrigerator compartment uses
LEDs light, allowing a better lightning as well as a very low
energy consumption.
If the LED light system does not work, please contact the
Service to replace it.
Important: The refrigerator compartment light switches
on when the refrigerator door is opened. If the door is kept
open for more then 8 minutes the light will be automatically
switched o.
(72 pages)
(8 pages)
(16 pages)
(52 pages)
(8 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals