Indesit VRM 641 MD IX Instruction for Use download pdf (Page 12)

Care and maintenance

Switching the appliance off

Disconnect your appliance from the electricity supply before

carrying out any work on it.

Cleaning the appliance

! Do not use abrasive or corrosive detergents (for example,

products in spray cans for cleaning barbecues and ovens),

stain removers, anti-rust products, powder detergents or

sponges with abrasive surfaces: these may scratch the

surface beyond repair.

! Never use steam cleaners or pressure cleaners on the

appliance.

• It is usually sufficient simply to wash the hob using a damp

sponge and dry it with absorbent kitchen towel.

• If the hob is particularly dirty, rub it with a special glass

ceramic cleaning product, then rinse well and dry

thoroughly.

• To remove more stubborn dirt, use a suitable scraper.

Remove spills as soon as possible, without waiting for

the appliance to cool, to avoid residues forming crusty

deposits. You can achieve excellent results by using a

rust-proof steel wire sponge - specifically designed for

glass ceramic surfaces - soaked in soapy water.

• If any plastic or sugary substances are accidentally

melted on the hob, remove them immediately with the

scraper, while the surface is still hot.

• Once it is clean, the hob may be treated with a special

protective maintenance product: the invisible film left

by this product protects the surface from drips during

cooking. This maintenance task should be carried out

while the appliance is warm (not hot) or cold.

• Always remember to rinse the appliance well with clean

water and dry it thoroughly: residues can become

encrusted during subsequent cooking processes.

Stainless steel frame (only in models with outer frame)

Stainless steel can be marked by hard water which has been

left on the surface for a long time, or by cleaning products

containing phosphorus.

After cleaning, it is advisable to rinse the surface well and dry

it thoroughly. If water is spilt on the surface, dry it quickly and

thoroughly.

! Some hobs have an aluminium frame which is similar to

stainless steel. Do not use any cleaning or degreasing

products which are not suitable for use with aluminium.

Disassembling the hob

If it is necessary to disassemble the hob:

1. Loosen the screws fixing the alignment springs on each

side.

2. Loosen the screws holding the fixing hooks in each corner.

3. Take the hob out of its installation cavity.

! Do not attempt to repair the appliance yourself. If the

appliance breaks down, contact a Service Centre.

Technical description of the models

This table provides a model-by-model list of the energy absorption values, type of heating elements and diameters of

each cooking zone.

Key:

H = single hilight

HD = double hilight

A = single halogen

Hobs

VRM 641 D C

VRM 641 D X

VRM 641 MD IX

VRM 641 MD C

VEM 645 C

Cooking zone

Power (W)

Diameter (mm) Power (W) Diameter (mm)

Back Left

HD 2200/1000 210/140 A 2200 210

Back Right

H 1400 160 H 1400 160

Front Left

H 1200 145 H 1200 145

Front Right

H 1800 180 H 1800 180

Total power

6600 6600

Hobs

VRM 640 C

VRM 640 X

VRM 640

VRM 640 M IX

VRM 640 M C

VRM 630 C

VRM 630 M C

Cooking zone

Power (W)

Diameter (mm)

Power (W)

Diameter (mm)

Back Left

H 1800 180 H 2300 210

Back Right

H 1400 160 H 1400 160

Front Left

H 1200 145

Front Right

H 1800 180 H 1800 180

Total power

6200 5500

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 75 76

Comments to this Manuals

No comments

Indesit VRM 641 MD IX Instruction for Use Page 12

Comments to this Manuals

Related products and manuals for Unknown Indesit VRM 641 MD IX