Indesit KN3G76SA(X)/EU Instruction for Use download pdf (Page 8)

Start-up and use

Using the hob

Lighting the burners

For each BURNER knob there is a full ring showing the

strength of the flame for the relevant burner.

To light one of the burners on the hob:

1. Bring a flame or gas lighter close to the burner.

2. Press the BURNER knob and turn it in an

anticlockwise direction so that it is pointing to the

maximum flame setting .

3. Adjust the intensity of the flame to the desired level

by turning the BURNER knob in an anticlockwise

direction. This may be the minimum setting , the

maximum setting  or any position in between the two.

If the appliance is fitted with

an electronic lighting device*

(C), press the BURNER knob

and turn it in an anticlockwise

direction, towards the

minimum flame setting,

until the burner is lit. The

burner may be extinguished

when the knob is released. If this occurs, repeat the

operation, holding the knob down for a longer period of

time.

! If the flame is accidentally extinguished, switch off the

burner and wait for at least 1 minute before attempting

to relight it.

If the appliance is equipped with a flame failure safety

device*(X), press and hold the BURNER knob for

approximately 2-3 seconds to keep the flame alight

and to activate the device.

To switch the burner off, turn the knob until it reaches

the stop position •.

Practical advice on using the burners

For the burners to work in the most efficient way

possible and to save on the amount of gas consumed,

it is recommended that only pans that have a lid and

a flat base are used. They should also be suited to the

size of the burner:

To identify the type of burner, please refer to the

diagrams contained in the “Burner and nozzle

specifications”.

Using the oven

! The first time you use your appliance, heat the empty

oven with its door closed at its maximum temperature

for at least half an hour. Ensure that the room is well

ventilated before switching the oven off and opening

the oven door. The appliance may emit a slightly

unpleasant odour caused by protective substances

used during the manufacturing process burning away.

! Before operating the product, remove all plastic film

from the sides of the appliance.

! Never put objects directly on the bottom of the oven;

this will avoid the enamel coating being damaged.

! Should the appliance be equipped with an electronic

programmer*, to use the electric oven, just press

buttons

and at the same time (the symbol

will appear on the display) before selecting the desired

cooking function.

1. Select the desired cooking mode by turning the

SELECTOR knob.

2. Select the recommended temperature for the

cooking mode or the desired temperature by turning

the THERMOSTAT knob.

A list detailing cooking modes and suggested cooking

temperatures can be found in the relevant table (see

Oven cooking advice table).

During cooking it is always possible to:

• Change the cooking mode by turning the

SELECTOR knob.

• Change the temperature by turning the

THERMOSTAT knob.

• Stop cooking by turning the SELECTOR knob to the

“0” position.

! Always place cookware on the rack(s) provided.

THERMOSTAT indicator light

When this is illuminated, the oven is generating heat.

It switches off when the inside of the oven reaches

the selected temperature. At this point the light

illuminates and switches off alternately, indicating

that the thermostat is working and is maintaining the

temperature at a constant level.

* Only available in certain models.

Burner ř Cookware diameter (cm)

Fast (R) 24 - 26

Semi Fast (S) 16 - 20

Auxiliary (A) 10 - 14

1 2 3 4 5 6 7 8 9 ... 60

Comments to this Manuals

No comments

Indesit KN3G76SA(X)/EU Instruction for Use Page 8

Comments to this Manuals

Related products and manuals for Microwaves Indesit KN3G76SA(X)/EU