Indesit SV70DPNAX Instruction for Use download pdf (Page 15)

Automatic cleaning using the

PYROLYTIC function

During the PYROLYTIC cycle, the internal

temperature of the oven reaches 500°C. The

pyrolytic cycle is activated, burning away food and

grime residues. Dirt is literally incinerated.

Keep children well away from the appliance during

the automatic cleaning cycle, as the surfaces may

become extremely hot. Particles may ignite inside

the oven due to the combustion process. Particles

may ignite inside the oven as a result of the

combustion process. This is not a cause for

concern; it is a normal process and is completely

safe.

Before initiating the PYROLYTIC mode:

! The oven should be cold. If the oven is too hot, the

pyrolytic cycle may not start. Wait for the oven to

cool down.

• Remove larger food residues from inside the oven

using a damp sponge. Do not use detergent.

• Remove all accessories.

• Remove the DIVIDER.

• Do not leave tea towels or pot holders on the oven

handle.

! The cycle will only begin once the oven door has

been closed.

To start the PYROLYTIC cycle, turn the

EXTRALARGE SPACE FUNCTION knob to

Press the

button. The SET TIME button may be

used to select the desired cleaning level. There are

three default time settings, which cannot be

modified:

1. Economy (ECO): turn the knob towards “-”.

Duration: 1 hour.

2. Normal (NOR): initial level. Duration: 1 hour and 30

minutes.

3. Intensive (INT): turn the knob towards “+”.

Duration: 2 hours.

4. Press the

button to confirm.

The end of the PYROLYTIC cycle may be

programmed in the same way as a normal cooking

cycle

(see Programming the automatic cleaning end

time).

Safety devices

• The

icon on the display, when lit, indicates

that the oven door was automatically locked as soon

as the temperature reached a high value.

• If a malfunction occurs, the heating elements will

be switched off.

• Once the oven door has been locked, it will no

longer be possible to modify the duration and end of

cycle settings.

Programming the automatic cleaning end time

1. Press the

button until the icon and the two

numerical digits on the DISPLAY begin to flash.

2. Turn the SET TIME knob towards “+” and “-” to

adjust the time.

3. Press the

button again, until the other

numerical digits on the DISPLAY begin to flash.

4. Turn the SET TIME knob towards “+” and “-” to

adjust the minute value.

5. Press the

button again to confirm.

6. Once the set time period has elapsed, the text

END appears on the DISPLAY and a buzzer sounds.

• For example: it is 9:00 and you have selected the

Economy (ECO) PYROLYTIC mode, which has a

default time of 1 hour. The end of the cycle is

scheduled for 12:30, meaning it will begin

automatically at 11:30.

If programming has been scheduled and confirmed,

the

and buttons will be illuminated. The duration

and the PYROLYTIC end time will appear alternately on

the DISPLAY.

At the end of the automatic cleaning cycle,

you will have to wait until the temperature inside the

oven has cooled down sufficiently before you can

open the oven door. You will notice some white dust

deposits on the bottom and the sides of your oven;

remove them with a damp sponge once the oven

has cooled down completely. If, on the other hand,

you wish to make use of the residual heat inside the

oven, you do not have to remove the dust deposits

as they are completely harmless and will not affect

your food in any way.

1 ... 14 15 16

Comments to this Manuals

No comments

Indesit SV70DPNAX Instruction for Use Page 15

Comments to this Manuals

Related products and manuals for Ovens Indesit SV70DPNAX