Indesit B PP 73 G HA 240S GT Instruction for Use download pdf (Page 18)

label with the one showing the new type of gas; the

sticker is available from our Service Centres.

Adjusting the low flame

• Put the tap to the low flame position;

• Remove the tap knob and turn the adjusting screw,

situated inside of the tap stem (Fig.11), using a

screwdriver (loosening the screw increases the

height of the flame, tightening decreases it).

note: the adjusting screw must be fully screwed down

for liquid gas.

• Having obtained the low flame setting required and

with the burner lit, abruptly change the position of

the knob several times from minimum to maximum

and vice versa and check that the flame does not

go out.

DATA PLAT

Electrical

connections

voltage of 230V ~ 50Hz (see data

plate )

This appliance conforms to the

following European Economic

Community directives:

-2006/95/EEC dated 12/12/2006

(Low Voltage) and subsequent

amendments

- 2004/108/EEC dated 15/12/04

(Electromagnetic Compatibility) and

subsequent amendments

- 93/68/EEC dated 22/07/93 and

subsequent amendments.

- 2209/142/EEC dated 30/11/09

(Gas) and subsequent

amendments.

- 2002/96/EC and subsequent

amendments.

Fig.11

Fig.9

Fig.10

1 ... 17 18 19 ... 76

No comments

Indesit B PP 73 G HA 240S GT Instruction for Use Page 18